19
Chapter 2
HARDWARE INSTALLATION
User's Manual | KD630
Graphics Interfaces
X
Rear I/O Ports
The display ports consist of the following:
• 1 VGA port
• 1 DVI-I (DVI-D signal) port
• 1 HDMI port
1
5
C
7
Battery
S1
S3
2
2
10
9
2
10
9
1
M.2 M Key
DVI-I (DVI-D
signal) port
HDMI port
USB 4 (USB 3.1 Gen 1)
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable
connector to the VGA port. After you plug the monitor’s cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
DVI-I (DVI-D Signal) Port
The DVI-I port is used to connect a LCD monitor. This port supports DVI-D signal only. Connect
the display device’s cable connector to the DVI-I port. After plugging the cable connector into
the port, gently tighten the cable screws to hold the connector in place.
HDMI Port
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
BIOS Setting
Configure the display devices in the Chipset menu (“Graphics Configuration” submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to the chapter 4 for more information.
