9
Chapter 2
HARDWARE INSTALLATION
User's Manual | KD630
•
Two 288-pin UDIMM up to 64GB
•
Dual Channel DDR4 up to 2666MHz
•
Core™ i5/i7 only support non-ECC
X
System Memory
Features
The system board supports the following memory interface.
Single Channel (SC)
Data will be accessed in chunks of 64 bits from the memory channels. DIMMs are on the same
channel. DIMMs in a channel can be identical or completely different. However, we highly rec-
ommend using identical DIMMs. Not all slots need to be populated.
Before installing the memory module, please make sure that the following safety cautions are
well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the DIMM socket on the system board
4. Make sure the notch on memory card is aligned to the key on the socket.
X
System Memory
Installing the DIMM Module
Socket Side View
Socket Top View
Memory Module
Notch
Key
Eject Tab
Eject Tab
DDR4_1
DDR4_2
1
5
C
7
Battery
S1
S3
2
2
10
9
2
10
9
1
M.2 M Key
