DFI KD630-H110, User Manual, Page: 33 / 47

31
Chapter 3
BIOS SETTINGS
User's Manual | KD630
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Determines the action tak -
en when the system power
is off and a PCI Power
Management Enable wake
up event occurs.
ACPI Configuration
Wake On LAN
Wake On PS/2
After G3
Wake On RTC
<Enabled>
<Disabled>
<Always On>
<Disabled>
Advanced
ACPI Configuration
Wake On LAN
Enable or Disable this field to allow LAN signal to power up the system.
Wake On PS/2
Enable or Disable this field to allow PS/2 keyboard or PS/2 mouse to power-on the system.
After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure.
Always On The system automatically powers on after power failure.
Always Off The system remains power off after power failure. Power-on signal input is re-
quired to power up the system.
Wake On RTC
When Enabled, the system will automatically wake up from S4/S5 state at a designated time
every day via the Real-time clock (RTC) battery.
[Wake up time]
Configure the time of day the system will wake on RTC — [HH:MM:SS]. This field will only ap-
pear when “Wake On RTC” is enabled.
X Advanced
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Wake on PS/2 device
Advanced
ACPI Configuration
Wake On LAN
Wake On PS/2
After G3
Wake On RTC
<Enabled>
<Disabled>
<Always On>
<Disabled>
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Wake On RTC from S4/S5
in everyday. It will
override the OS schedule
for RTC wake.
Advanced
ACPI Configuration
Wake On LAN
Wake On PS/2
After G3
Wake On RTC
Wake up time
<Enabled>
<Disabled>
<Always On>
<Enabled>
[00:00:00]