background image

www.dfi .com

48

Chapter 4 Supported Software

Chapter 4

Intel Graphics Drivers

 

To install the driver, download “KD300 Graphics Driver” zip file at our website.

1.  Setup is now ready to 

install the graphics driver. 

Click “Next”.

2.  Read the license agreement 

then click “Yes”.

By default, the “Automatically run WinSAT and enable the Windows Aero desktop theme” 

is enabled. With this enabled, after installing the graphics driver and the system rebooted, 

the screen will turn blank for 1 to 2 minutes (while WinSAT is running) before the Win-

dows 7/8.1/10 desktop appears. The “blank screen” period is the time Windows is testing 

the graphics performance. 

We recommend that you skip this process by disabling this function then click “Next”.

4.  Setup is now installing 

the driver. Click “Next” to 

continue.

3.  Go through the readme 

document for system re-

quirements and installation 

tips then click “Next”.

5.  Click “Yes, I want to restart 

this computer now” then 

click “Finish”.

 

Restarting the system will 

allow the new software 

installation to take effect.

 

Summary of Contents for KD300-H110
















































































Reviews: