www.d
fi
.com
42
Chapter 3 BIOS Setup
Chapter 3
When Console Serial Redirect is set to enabled, the screen will appear like below:
Enable Console Redirec-
tion Function
Console Redirection Setup
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
COMA
Enable VT-100, 115200, N81
COMB
Disable VT-100, 115200, N81
COMC
Disable VT-100, 115200, N81
COMD
Disable VT-100, 115200, N81
COME
Disable VT-100, 115200, N81
COMF
Disable VT-100, 115200, N81
Pci Serial Port 0:22:3
Disable VT-100, 115200, N81
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
Terminal Type
Select terminal type: VT_100, , VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: none, even or odd.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: none, RTS/CTS or XON/XOFF.
PortEnable
UseGlobalSetting
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Enabled>
COMA to COMF and Pci Serial Port 0:22:3
PortEnable
This field is used to enable or disable the COM port to redirect the console.
UseGlobalSetting
This field is to enable or disable to use global setting. When enabled the global set-
ting, setting of the COM port will be the same as those in Console Redirection section.
When disabled the global setting, setting of the COM port can be configured indepen-
dently in this section.
