DFI KD300-H110, User Manual

Page: 43 / 79

www.d fi .com
43
Chapter 3 BIOS Setup
Chapter 3
PortEnable
UseGlobalSetting
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility Rev. 5.0
<Enabled>
<Disabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
When UseGlobalSetting is set to disabled, the screen will appear like below:
Security
TPM Availability
Set the TPM availability.
TPM Operation
Select one of the supported operation to change TPM2 state.
Clear TPM
Remove all TPM context associated with a specific owner.
Set Supervisor Password
Set the supervisor’s password and the length of the password must be greater than
one character.
When Hidden, don’t ex-
poses TPM to 0
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
Security Boot Exit
Rev. 5.0
<TPM 2.0 (DTPM)>
All Hierarchies Enabled, Owned
<Available>
<No Operation>
[ ]
Not installed
TMP Availability
Available
Hidden