manualshive.com logo in svg

DFI K8M800 INFINITY, User Manual

The DFI K8M800 INFINITY boasts exceptional performance with its advanced features and reliable construction. Unlock the full potential of this product by referring to the comprehensive User Manual. Easily accessible for free download at manualshive.com, it provides detailed instructions to optimize your experience with the K8M800 INFINITY.

Share
Download
background image

115

4

Supported Software

4.4  Installation Notes

1. "Autorun" ONLY supports the Windows

 98, Windows

 98 SE,

Windows

 

ME, Windows

 2000, Windows NT

 4.0 and

Windows

 XP operating systems. If after inser ting the CD,

"Autorun" did not automatically start (which is, the Main Board
Utility CD screen did not appear), please go directly to the root
directory of the CD and double-click "Setup".

2. All steps or procedures to install software drivers are subject to

change without notice as the softwares are occassionally updated.
Please go to DFI's web site at "http://www.dfi.com/support1/
download2.asp" for the latest version of the drivers or software
applications.

Xear 3D

Xear 3D is a sound technology for 2-channel virtual surround,
adjustable multi-channel sound field, innovative listening mode,
amazing sound effects and 3D positional audio. It has 3 functional
blocks: Virtual Speaker Shifter, Sound Effect and Multi-channel Music
Demo.

A complete version of the 3D Audio Configuration manual is
provided in the CD.

Summary of Contents for K8M800 INFINITY



























































































































Reviews:

No comments

Related manuals for K8M800 INFINITY

Acer V65XA Safety Instructions preview
V65XA
Brand: Acer Pages: 15
Acer V60N Safety Instructions preview
V60N
Brand: Acer Pages: 12
Biostar BI94GS-IAC Setup Manual preview
BI94GS-IAC
Brand: Biostar Pages: 53
Safran STIM277H User Manual preview
STIM277H
Brand: Safran Pages: 26
TYAN S3892 Manual preview
S3892
Brand: TYAN Pages: 117
Quantum KuDoz 7 series Manual preview
KuDoz 7 series
Brand: Quantum Pages: 69
ECS 760GX-M Manual preview
760GX-M
Brand: ECS Pages: 93
Texas Instruments TPS55065EVM User Manual preview
TPS55065EVM
Brand: Texas Instruments Pages: 13
Diamond Systems Athena II User Manual preview
Athena II
Brand: Diamond Systems Pages: 112
Shuttle FB81 Manual preview
FB81
Brand: Shuttle Pages: 81
Fastfame 9W AP Series User Manual preview
9W AP Series
Brand: Fastfame Pages: 41
Avalue Technology EAX-Q170P User Manual preview
EAX-Q170P
Brand: Avalue Technology Pages: 79
QDI P5I915PL Manual preview
P5I915PL
Brand: QDI Pages: 47
SELVA MARINE Black Bass 7 Owner'S Manual preview
Black Bass 7
Brand: SELVA MARINE Pages: 35
DFI E586-ICP User Manual preview
E586-ICP
Brand: DFI Pages: 96
Honda BF 30 DK2 SHGU Instructions For Use Manual preview
BF 30 DK2 SHGU
Brand: Honda Pages: 132
Liantec ITX-QM77 Quick Installation Manual preview
ITX-QM77
Brand: Liantec Pages: 4
MSI MS-7260 User Manual preview
MS-7260
Brand: MSI Pages: 115

Brands by name

Popular brands

Load more brands