DFI HU171 User Manual Download Page 68

Page: 68 / 90

www.dfi .com

Chapter 4 Supported Software

Chapter 4

F6 Floppy (For Windows 7 Only)

This is used to create a floppy driver diskette needed when you install Windows® XP using

the F6 installation method. This will allow you to install the operating system onto a hard drive

when in AHCI mode.

1. Insert a blank floppy diskette.

Locate for the drivers in the CD then copy them to the floppy diskette. The CD includes

drivers for both 32-bit and 64-bit operating systems. The path to the drivers are shown

below.

32-bit

Drive:\AHCI_RAID\F6FLOPPY\f6flpy32

64-bit

Drive:\AHCI_RAID\F6FLOPPY\f6flpy64

Infineon TPM Driver and Tool (optional)

To install the driver, click “Infineon TPM driver and tool (option)” on the main menu.

1. The setup program is preparing to

install the driver.

2. The setup program is now ready to

install the utility. Click Next.

Click “I accept the terms in the
license agreement” and then click
“Next”.

Summary of Contents for HU171



























































































Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands

DFI HU171, User Manual

Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands