www.dfi .com
45
Chapter 3 BIOS Setup
Chapter 3
Intel(R) Ethernet Connection I218-LM - 88:88:88:88:87:88...
(Only for reference)
This section is used to configure the parameters of the Gigabit Ethernet device.
Confi gure Boot Protocol,
Wake on LAN, Link
Speed, and VLAN.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PORT CONFIGURATION MENU
NIC Confi guration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
Bus: Device: Function:
Link Status
MAC Address:
Advanced
0
Intel(R) PRO/1000 5.5.23
FFFFFF-OFF
Intel PCH LPT
155A
00:19:00
[Disconnected]
88:88:88:88:87:88
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Blink LEDs
Identifies the physical network port by blinking the associated LED.
Link Status
This field indicates the link status of the network device.
NIC Configuration
This field is used to configure the Boot Protocol, Wake on LAN, Link Speed and VLAN.
Specifi es the port speed
used for the selected boot
protocol
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Link Speed
Wake on LAN
Advanced
[Auto Negotiaed]
[Enabled]
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Link Speed
This field is used to specify the port speed used for the selected boot protocol.
Wake on LAN
Enables the server to be powered on using an in-band magic packet.
