DFI HU171 User Manual Download Page 57

Page: 57 / 90

www.dfi .com

Chapter 4 Supported Software

Chapter 4

Intel HD Graphics Drivers

To install the driver, click “Intel HD Graphics Drivers” on the main menu.

1. Setup is now ready to

install the graphics driver.

Click Next.

By default, the “Automatically run WinSAT and enable the Windows Aero

desktop theme” is enabled. With this enabled, after installing the graphics

driver and the system rebooted, the screen will turn blank for 1 to 2 minutes

(while WinSAT is running) before the Windows Vista desktop appears. The

“blank screen” period is the time Windows is testing the graphics perfor-

mance.

2. Read the license agreement

then click Yes.

4. Setup is now installing the

driver. Click Next to con-

tinue.

3. Go through the readme

document for system re-

quirements and installation

tips then click Next.

5. Click “Yes, I want to restart

this computer now” then

click Finish.

Restarting the system will

allow the new software

installation to take effect.

Note:

If the graphics driver is not installed into the system, the 4K display monitor will

display black or white screen. After completing the installation of the graphics driver,

the monitor will display normally.

Summary of Contents for HU171



























































































Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands

DFI HU171, User Manual

Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands