DFI HU171 User Manual Download Page 6

Page: 6 / 90

Rear Panel I/O
Ports

• 1 12V (HU171) or 19~24V (HU173) DC-in jack

or 4-pin power connector* (optional)

• 1 HDMI port

• 1 DP port

• 2 RJ45 LAN ports

• 4 USB 3.0 ports

• Line-out and mic-in jacks

I/O Connectors

• 3 connectors for 6 external USB 2.0 ports

• 1 vertical USB 2.0/1.1 port* (optional)

• 4 connectors for 4 external serial ports (2.0mm pitch)

- 1 RS232/RS422/485 (RS232 and/or power)

- 3 RS232

• 1 LVDS LCD panel connector

• 1 LCD/inverter power connector

• 1 eDP connector* (optional)

• 1 VGA connector* (optional)

• 1 8-bit Digital I/O connector

• 1 Digital I/O power connector

• 1 front audio connector for line-out and mic-in jacks

• 1 S/PDIF connector

• 1 PS/2 connector for keyboard/mouse port

• 1 LPC connector

• 1 SMBus connector

• 3 Serial ATA connectors

• 3 Serial ATA power connectors

• 1 front panel connector

• 1 chassis intrusion connector

• 3 fan connectors

WatchDog Timer

• Watchdog timeout programmable via software from 1 to 255 seconds

BIOS

• AMI BIOS

- 64Mbit SPI BIOS

Energy Efficient

Design

• Supports ErP Lot6 power saving* (optional)

• Supports ACPI

• System Power Management

• Wake-On-Events include:

- Wake-On-PS/2 KB/Mouse* (optional)

- Wake-On-USB KB/Mouse* (optional)

- Wake-On-LAN

- RTC timer to power-on the system

• AC power failure recovery

Damage Free
Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors VCORE/12V/5V/DDR voltages and failure alarm

• Monitors CPU/system fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan speed

Power
Consumption

• TBD

Temperature

• Operating: 0

C to 60

• Storage: -20

C to 85

Chapter 1 - Introduction

Specifications

Processor

•

4th generation Intel

Core

processors

4650U: Intel

Core

i7-4650U, 4M Cache, up to 3.3 GHz, 15W

4010U: Intel

Core

i3-4010U, 3M Cache, 1.7 GHz, 15W

(The following specifications will be available upon request. Please contact

your sales representative for more information.)

4300U: Intel

Core

i5-4300U, 3M Cache, up to 2.9 GHz, 15W

2980U: Intel

Celeron

2980U, 2M Cache, 1.6 GHz, 15W

•

BGA 1168 packaging technology

• 22nm process technology

Super I/O
Address

• NCT6106/4Eh

System Memory

• Two 204-pin SODIMM sockets

• Supports DDR3L 1333/1600MHz

• Supports up to 16GB system memory

• Supports dual channel memory interface

• DRAM device technologies: 1Gb, 2Gb and 4Gb DDR3L DRAM technologies are

supported for x8 and x16 devices, unbuffered, non-ECC

Expansion
Interfaces

• 1 PCIe x1 slot

• 2 Mini PCIe slots

- 1 full size supports USB, PCIe and mSATA signals

- 1 half size supports USB and PCIe signals

Graphics

• Intel

HD Graphics GT series

• Display ports: 1 HDMI, 1 DP, 1 LVDS (default) or 1 VGA* (optional)

or 1 eDP* (optional)

• HDMI: resolution up to 4096x2304 @ 24Hz or 2560x1600 @ 60Hz

• DP: supports DP++, resolution up to 3200x2000 @ 60Hz

• LVDS: NXP PTN3460, 24-bit, dual channel, resolution up to 1920x1200 @ 60Hz

• VGA: resolution up to 1920x1200 @ 60Hz

• Intel

Clear Video Technology

• Intel

Advanced Vector Extensions 2.0 (Intel

AVX 2.0) Instructions

• Supports DirectX 11.1, OpenGL 4.0, OpenCL 1.2

Audio

• Realtek ALC888 5.1-channel High Definition Audio

• S/PDIF audio interface

LAN

• Intel

I210 PCI Express Gigabit Ethernet controller

• Intel

I218 with iAMT9.5 Gigabit Ethernet Phy

• Integrated 10/100/1000 transceiver

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Serial ATA

• 3 SATA 3.0 ports with data transfer rate up to 6Gb/s

- SATA port 2 provides adequate space for SATA DOM

• Integrated Advanced Host Controller Interface (AHCI) controller

• Supports RAID 0/1/5

• Supports Intel

Smart Response Technology

Active
Management
Technology - AMT

• Supports iAMT9.5

• Out-of-band system access

• Remote troubleshooting and recovery

• Hardware-based agent presence checking

• Proactive alerting

• Remote hardware and software asset tracking

Trusted
Platform
Module - TPM*
(optional)

• Provides a Trusted PC for secure transactions

• Provides software license protection, enforcement and password protection

Chapter 1

Chapter 1 Introduction

www.dfi.com

Summary of Contents for HU171



























































































Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands

DFI HU171, User Manual

Search results

Summary of Contents for HU171

Reviews:

Related manuals for HU171

Brands by name

Popular brands