background image

41

Chapter 3 BIOS Setup

Chapter 3

Aux Fan Mode

Selects the Aux fan’s mode. The options are Thermal CruiseTM Mode, Fan Speed 

CruiseTM Mode and SmartFan TM IV Mode.

AuxFan Target Temp

This field is used to enter the target value of the Aux fan’s temperature.

AuxFan Tolerance

This field is used to enter the tolerance value of the Aux fan’s temperature.

Power Failure Control

This section configures the status control when the power failure occurs.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Power Failure Control

Power-Loss State

Advanced

[Keep Last State]



 Select Screen



   Select Item

Enter: Select
+/-:   Change Opt.
F1:   General Help
F2: Previous 

Values

F3: Optimized 

Defaults

F4:   Save & Exit  
ESC:  Exit

Control the status when 
power loss occurs

Power-Loss State

Controls the status when the power loss occurs.

Always Off

When power returns after an AC power failure, the system’s power is off. You 

must 

press the Power button to power-on the system.

Always On

When power returns after an AC power failure, the system will automatically power-on.

Keep Last State

When power returns after an AC power failure, the system will return to the state 

where you left off before power failure occurs. If the system’s power is off when AC 

power failure occurs, it will remain off when power returns. If the system’s power is on 

when AC power failure occurs, the system will power-on when power returns.

Summary of Contents for HU101

































































































Reviews: