35
Chapter 3 BIOS Setup
Chapter 3
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
Number of cores to enable
in each processor package.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Advanced
Active Processor Cores
Number of cores to enable in each processor package.
Limit CPUID Maximum
Disabled for Windows XP.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
Boot Performance Mode
Selects the performance state that the BIOS will set before OS handoff.
EIST
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit
CPU Confi guration
Intel(R) Core(TM) i7-4650U CPU @1.70GHz
CPU Signature
Processor Family
Microcode Patch
FSB Speed
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-X Technology
Intel SMX Technology
64-bit
EIST Technology
CPU C3 State
CPU C6 State
CPU C7 State
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Active Processor Cores
Limit CPUID Maximum
Intel Virtualization Technology
Boot Performance Mode
EIST
40651
6
17
100 MHz
1600 MHz
800 MHz
1600 MHz
2
Not Supported
Supported
Not Supported
Supported
Supported
Supported
Supported
Supported
32 KB x2
32 KB x2
256 KB x2
2048 KB
[All]
[Disabled]
[Enabled]
[Max Non-Turbo Perfo...]
[Enabled]
SATA Configuration
This section is used to configure the settings of SATA device.
Enable or disable SATA
Device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Port 0
SATA Device Type
Serial ATA Port 1
Software Preserve
Port 1
SATA Device Type
Serial ATA Port 2
Software Preserve
Port 2
SATA Device Type
Serial ATA Port 3
Software Preserve
Port 3
SATA Device Type
Advanced
SATA Controller(s)
This field is used to enable or disable Serial ATA devices.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
RAID Mode
This option allows you to create RAID or Intel Matrix Storage configuration on Serial
ATA devices.
Port 0/1/2/3
This field is used to enable or disable the serial ATA port.
SATA Device Type
Identify the serial ATA port which is connected to the Solid State Drive or the Hard
Disk Drive.
[Enabled]
[AHCI]
Empty
Unknown
[Enabled]
[Hard Disk Drive]
ST160LT007-92V (160.0GB)
SUPPORTED
[Enabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Drive]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit
