manualshive.com logo in svg

DFI G586VSY AIO, Quick Reference, Page: 46 / 61

Share
Download
DFI G586VSY AIO Quick Reference Download Page 46

46

MEMORY SIZE HAS CHANGED SINCE LAST BOOT

Memory has been added or removed since the last boot. Enter Setup
and enter the new memory size in the memory fields.

MEMORY VERIFY ERROR AT...

Indicates an error verifying a value already written to memory. Use the
location along with your system’s memory map to locate the bad chip.

OFFENDING ADDRESS NOT FOUND

This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem cannot be isolated.

OFFENDING SEGMENT

This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem has been isolated.

PRESS A KEY TO REBOOT

This will be displayed at the bottom screen when an error occurs that
requires a reboot. Press any key and the system will reboot.

SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT...

Indicates the present boot attempt has been aborted and the system
must be rebooted. Press and hold down the CTRL, ALT and DEL keys
simultaneously.

IDE Device Drivers

To install the IDE device drivers supported by the G586VSY AIO sys-
tem board, please refer to the “Readme” file contained in the provided
diskette.

Summary of Contents for G586VSY AIO






























































Reviews:

No comments