37
PNP/PCI Configuration Setup
Use the arrow keys to highlight “PNP/PCI Configuration Setup” and
press <Enter>; a screen similar to the one below will appear.
The PNP/PCI Configuration Setup allows you to assign INT A, B, C or D
to the hard drives installed in your system. Each INT may then be as-
signed an IRQ value.
If the Resources Controlled By option is set to “Auto”, the system will
automatically detect the settings for you. IRQ 3 - IRQ 15 and DMA 0 -
DMA 7 options will not be shown in the PnP Configuration Setup
screen.
Load BIOS Defaults
The “Load BIOS Defaults” option loads the troubleshooting default val-
ues permanently stored in the ROM chips. These settings are not opti-
mal and turn off all high performance features. You should use these
values only if you have hardware problems. Highlight this option on the
main menu and press <Enter>. The message below will appear.
Load BIOS Defaults (Y/N)? N
If you want to proceed, press <Y> and the default settings will be
loaded.
ROM PCI/ISA BIOS (2A59GD49)
PNP/PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
Resources Control By
Reset Configuration Data
:Auto
:Disabled
ESC
F1
F5
F6
F7
:Quit
:Help
:Old Values
:Load BIOS Defaults
:Load Setup Defaults
↑↓→ ←
PU/PD/+/-
(Shift) F2
:Select Item
:Modify
:Color
PCI IRQ Active By
:
Level
PCI IDE IRQ Map To
:
PCI-AUTO
Primary
IDE INT#
:
A
Secondary IDE INT#
:
B
