43
Warning:
Do not attempt to do a low-level format on an IDE drive, or you may
cause serious damage to the drive. IDE disk drives are already low-
level formatted, with any bad-track errors entered, when shipped by the
drive manufacturer.
Save & Exit Setup
When all the changes have been made, highlight “Save & Exit Setup”
and press <Enter>. The message below will appear:
Save to CMOS and Exit (Y/N)? N
Type “Y” and press <Enter>. The following message will appear:
Reboot System (Y/N)? N
Type “Y” and press <Enter>. The modifications you have made will be
written into the CMOS memory, and the system will reboot. You will
once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc> simul-
taneously or <Del> after memory testing is done.
Exit Without Saving
When you do not want to save the changes you have made, highlight “Exit
Without Saving” and press <Enter>. The message below will appear:
ROM PCI/ISA BIOS (2A59GD49)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Hard Disk Low Level Format
Utility
SELECT DRIVE
BAD TRACK LIST
PERFORMAT
Current select drive is : C
DRIVE: C CYLINDER: 0
HEAD: 0
Primary Master:
Primary Slave:
Secondary
Master:
Secondary Slave:
SIZE
853
0
0
0
CYLS
1654
0
0
0
HEAD
16
0
0
0
RECOMP
65536
0
0
0
LANDZ
1653
0
0
0
SECTOR
63
0
0
0
MODE
AUTO
AUTO
AUTO
AUTO
Up/Down-Select item
ENTER-Accept
ESC-Exit/Abort
Copyright (C) Award Software, Inc. 1992-94 All Rights Reserved
No. CYLS HEAD