DFI G586VPA, User Manual

Page: 11 / 92

G586VPB
Installation Overview
u
2-1
v
Installation Overview
This chapter summarizes the steps in installing the
G586VPB system board into your system unit. It also
includes a description of the area in which you must
work and directions for memory installation. Before
installing the system board, obtain the memory you plan
to install. Please refer to the memory chart on page 2-4
and 2-5 for the number and type of HSIM modules
needed for the amount of memory you require.
Preparing the Area
Before unpacking the system board, make sure the
location you have selected is relatively free of dust and
static. Excessive exposure to dust, static electricity,
direct sunlight, excessive humidity, extreme cold, and
water can damage the operational capabilities of your
system board. Avoid placing the unit on soft surfaces
such as beds and carpeted floors which can hinder air
circulation. These areas also attract static electricity
which can damage some circuits on your system board.
Be sure that the power source has a properly grounded,
three-pronged socket. It is essential that the power
connection be properly grounded for correct functioning
of your system board. For further protection, we recom-
mend that you use a surge protection socket. This will
protect the system board from damage that may result
from a power surge on the line.
Move items that generate magnetic fields away from
your system board, since magnetic fields can also dam-
age your system board. Once you have selected the ideal
location, unpack the G586VPB system board carefully.