Energy Star Compliant System Board
If none of the pre-set types is appropriate for your hard
drive, choose “User,” which is the user-definable type.
To use this type, highlight either hard disk C or D,
depending on your hard drive configuration. Use the
arrow keys until type “User” is showing. Fill in all the
parameters as specified by the drive manufacturer. You
may also use the “IDE HDD Auto Detection” from the
Main Menu to set up your HDD parameters. If either of
the drives is not present, select “None” and press <En-
ter>.
Note:
When HDD type is “User,” the Mode option will be
opened for the user to select their own HDD mode.
Drive A and Drive B
These options are used to select the type of floppy disk
drives installed in your system. If either of the drives is
not present, select “None.” Make sure you choose the
correct drive type; otherwise, your system might im-
properly format diskettes.
Video
This is used to select the type of video adapter installed
in your system.
Halt on
This option selects when the system will halt if an error
is detected during power up.
No Errors:
The system boot will not stop for any
errors detected.
All Errors:
The system will stop whenever the BIOS
detected a non-fatal error.
3-4
u
Initial Setup Program
