manualshive.com logo in svg

DFI E586-ICP, User Manual, Page: 67 / 96

Share
Download
DFI E586-ICP User Manual Download Page 67

E586-ICP/E586-IPE

2. Highlight “Board Name” and press <Enter>. The

cursor will appear for you to type-in the name of the
board. After typing-in the board name, press
<Enter>.

3. Highlight “Manufacturer” and press <Enter>. The

cursor will appear for you to type-in the name of the
manufacturer. After typing-in the manufacturer’s
name, press <Enter>.

4. Highlight “Board Type” and press <Enter>. Select

the appropriate option for the board and press
<Enter>.

5. Highlight “Slot Type” and press <Enter>. Select the

slot type appropriate for the board and press <Enter>.

6. It is necessary to define an ISA board when you want

to prevent other boards in the system from using the
same IRQ levels, DMA channels, I/O Port address or
Memory address that your ISA board uses.

“DMA” allows you to define up to four (4) DMA

channels.

a. Select one of the DMA options and press

<Enter>. The ISA DMA Definition box similar
to the one shown on the next page will appear.

  

         

 

  

EISA Configuration Utility  

u

  4-21

Summary of Contents for E586-ICP

































































































Reviews:

No comments