EISA/PCI System Board
Utilities Configuration
This screen controls how a configuration is produced.
Several options are available, each one can be enabled or
disabled by pressing SPACE when an option is
highlighted. To configure the Utilities:
From the main menu, press <F9> and a Utilities box
similar to the one shown below will appear.
Remote Mode
The Remote Mode of the configuration should be turned
off if you are working on this computer. If you want to
produce a configuration for a computer other than this
one, turn on the Remote Mode. If Remote Mode is off,
configuration information will be stored in this
computer’s EISA CMOS RAM as well as a CMS file
and INF file.
EISA CONFIGURATION UTILITY, Release 2.01 - (C)1992 American Megatrends Inc.
Step 6: Exit
[ F5 ] = Restore configuration from backup (CMS file)
[ F6 ] = Display Physical Board ID Map
[ F7 ] = Define ISA Board
Press <Space> to change settings.
Utilities
[Select=Enter]
[Exit=Esc]
[Help=F1] [Utilities=F9]
[ ] Remote Mode (make a configuration for another system)
[ ] Advanced/Dealer Mode (show functions marked as EXP)
[ ] Force new configuration (ignore previous settings)
[ ] Load CFG files manually from directory list
[ ] Load CFG files listed in CFGLIST.DAT
[ ] Ignore ID mismatches between installed boards and CMOS
[OK=ENTER]
[Cancel=ESC]
4-18
u
EISA Configuration Utility
