1
Introduction
7
About the Package
The system board package contains the following items. If any of
these items are missing or damaged, please contact your dealer or
sales representative for assistance.
;
The system board
;
One IDE cable (44-pin to 44-pin)
;
One audio cable - Speaker-out, mic-in and line-in (optional)
;
One serial cable
;
One Serial ATA data cable
;
One Serial ATA power cable
;
One PS/2 keyboard/mouse cable
;
One power cable
;
One CPU cooler
;
One “Main Board Utility” CD
;
One QR (Quick Reference)
The system board and accessories in the package may not come
similar to the information listed above. This may differ in accordance
to the sales region or models in which it was sold. For more infor-
mation about the standard package in your region, please contact
your dealer or sales representative.
Before Using the System Board
Before using the system board, prepare basic system components.
If you are installing the system board in a new system, you will need
at least the following internal components.
•
A CPU
•
Memory module
•
Storage devices such as hard disk drive, CD-ROM, etc.
You will also need external system peripherals you intend to use
which will normally include at least a keyboard, a mouse and a video
display monitor.
Important:
Use the power cable included in the package. This cable is
exclusively for CT930-B. Refer to the I/O Connectors section in
chapter 2 for the pin functions of the power connector.
Summary of Contents for CT930-B
Page 1: ...CT930 B ECX Board User s Manual 935 CT9303 050G I01910743...
Page 16: ...16 2 Hardware Installation CT930 B solder side...
Page 102: ...102 4 Supported Software 3 Click Finish Reboot the system for DirectX to take effect...
Page 109: ...109 4 Supported Software 4 After completing installa tion click Finish to exit setup...