DFI BE17 User Manual Download Page 30

Page: 30 / 61

www.dfi .com

Chapter 3 BIOS Setup

Chapter 3

ACPI Settings

This section is used to configure the ACPI Settings.

Enables or Disables BIOS
ACPI Auto Confi guration.

ACPI Settings

Enable ACPI Auto Confi guration

Enable Hibernation
ACPI Sleep State

Advanced

[Disable]

[Enable]
[S3 only (Suspend to ...) ]

Enable ACPI Auto Configuration

Enable or disable BIOS ACPI auto configuration.

Enable Hibernation

Enable or disable System ability to Hibernate (OS/S4 Sleep State). This option may be
not effective with some OS.

ACPI Sleep State

Select the ACPI sleep state that the system will enter when the Suspend button is

pressed.

S3(STR) Enable the Suspend to RAM function.



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save Changes and
Reset
ESC: Exit

Trusted Computing

This section is used to configure the Trusted Computing Settings.

Enables or Disables
BIOS support for security
device. O.S. will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.

Confi guration

Security Device Support

Current Status Information
SUPPORT TURNED OFF

Advanced

[Disable]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save Changes and
Reset
ESC: Exit

Security Device Support

This field is used to enable or disable BIOS supporting for the security device. O.S will

not show the security device. TCG EFI protocol and INT1A interface will not be

available.

Summary of Contents for BE17






























































Search results

Summary of Contents for BE17

Reviews:

Related manuals for BE17

Brands by name

Popular brands

DFI BE17, User Manual

Search results

Summary of Contents for BE17

Reviews:

Related manuals for BE17

Brands by name

Popular brands