www.d
fi
.com
35
Chapter 3 BIOS Setup
Chapter 3
www.d
fi
.com
35
Chapter 3 BIOS Setup
Fix Fan Speed Count
Set the fix fan speed. The range is from 1-100% (full speed).
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed. The range is from 0-127
o
C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 1-100% (full speed).
COM Port 1
Configure the settings to use the serial port.
Disable
No configuration
Enable
User con
fi
guration
Type
Choose RS232/RS485/RS422 (Peer-to-Peer) for COM type.
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 to 255 seconds.
Case Open
Enable or disable the case open detection.
ERP Support
Enable or disable ERP Support Setting.
PC Health Status
This section displays the PC health status.
PC Health Status
Voltage
VBAT
VCORE
VDDQ
5V
+12V
Temperature
System (
o
C/
o
F)
CPU (
o
C/
o
F)
Fan Speed
CPU FAN
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
3.056 V
0.896 V
1.200 V
4.939 V
12.144 V
38.5 C/ 101.3 F
45.5 C/ 113.9 F
0 RPM
