20
SATA Configuration
This section configures the SATA controller.
SATA Controller
This field is used to enable or disable the Serial ATA controller.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
SATA Speed Selection
Select Serial ATA controller(s) speed from Gen1 (1.5 Gbit/s), Gen2 (3.0 Gbit/s) or Gen3
(6.0 Gbit/s).
Serial ATA Port 0
This field is used to enable or disable the serial ATA port.
Enables or Disables the
Chipset SATA Controller.
SATA Controller
SATA Mode Selection
SATA Speed
Selection
SATA Port 0
SATA Port 0
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<AHCI>
<Gen3>
[Not Installed]
<Enabled>
PCI Express Configuration
This section configures settings relevant to PCI Express root ports.
Control the PCI Express
Root Port.
Enable: Enable PCIe root
port
Disable: Disable PCIe root
port
PCI Express Root Port 2 (Mini PCIE)
PCI Express Root Port 4 (LAN)
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
Control the PCI Express
Root Port.
Enable: Enable PCIe root
port
Disable: Disable PCIe root
port
PCI Express Root Port 2 (Mini PCIE)
Hot Plug
PCIe Speed
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Disabled>
<Auto>