11
Graphics Interface
The display port consists of the following:
• 1 Mini DP++ port
Mini DP++ Port
The Mini DP++ port is a digital display interface used to connect a display device such as a
computer monitor. It is used to transmit audio and video simultaneously. The interface, which
is developed by VESA, delivers higher performance features than any other digital interfaces.
Driver Installation
Install the graphics driver. Refer to Chapter 4 for more information.
Mini DP++
USB Ports
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with 2 onboard USB 3.1 Gen1 ports (USB 0-1). The 10-pin con-
nector allows you to connect 2 additional USB 2.0 ports (USB 6-7). The additional USB ports
may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at
the rear of the system chassis and then insert the USB port cables to a connector.
BIOS Settings
Configure the onboard USB in the Boot menu in the BIOS. Refer to Chapter 3 for more infor-
mation.
USB 2.0
USB 1
USB 3.1 Gen1
USB 0
GND
USB 6-7
2
1
10
9
PWR
DATA-
DATA+
NC
GND
PWR
DATA-
DATA+
NC