18
ACPI Configuration
This section configures the system ACPI parameters.
Enable/Disable Wake On
LAN capability
Wake On LAN <Disabled>
After G3 <Always On>
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
Wake On LAN
This field is used to enable or disable the LAN signal to wake up the system.
After G3
This field is to specify what state the system should be in when power is re-applied
after a power failure (G3, the mechanical-off, state).
Always On
The system working state.
Always Off
Off, except for trickle current to devices such as the power button.
Note:
If "Quiet Boot" of Boot menu is set to enabled, "BGRT Logo" will appear for
configuration. Refer to the Boot menu in this chapter for more information.
Support display logo with
ACPI BGRT table.
Wake On LAN
<Disabled>
After G3 <Always On>
BGRT Logo <Enabled>
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
BGRT Logo
This field is used to enable or disable to support display logo with ACPI BGRT table.