55
3
Award BIOS Setup Utility
Max Saving
Maximum power management. Standby Mode
= 30 Sec, and HDD Pown Down = 1 Min.
User Define
When selected, the Standby Mode and HDD
Power Down fields can be set.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Initializes display power management signaling. Use
this option if your video board supports it.
Standby Mode
This is selectable only when the Power Management field is set to
User Define. When the system enters the Standby mode according
to the power saving time selected, video will be shut off while all
other devices still operate at full speed.
HDD Power Down
This is user configurable only when the Power Management category
is set to User Define. After the set time of system inactivity, the hard
disk drive will be powered down while all other devices remain active.
The set time ranges from 1 Min to 15 Min or you can disable this
field.
HDD Down In Suspend
The default setting is Disabled. When enabled, the hard drive will be
powered off once the system enters the Suspend mode.
Soft-Off by PBTN
This category allows you to select the method of powering off your
system.
