586OP
Installing the OS/2 v2.1x Driver
To install:
1. Insert the “PC87410 PCI IDE Device Drivers”
diskette into a floppy drive.
2. After OS/2 is installed, click the OS/2 System icon.
The OS/2 System - Icon View screen will appear.
Select the System Setup icon. Another screen will
appear. Select the Device Driver Install icon to
proceed with the driver installation.
3. The OS/2 2.1 Device Driver Installation screen will
appear. Change the source directory to A:\OS2.DRV
and select Install.
To remove:
1. When you install the OS/2 driver, the original
CONFIG.SYS under the C:\ directory will be re-
named as CONFIG.1.
To remove the OS/2 driver, rename CONFIG.1 to
CONFIG.SYS.
C:\COPY CONFIG.1 CONFIG.SYS
2. Reboot the system.
Installing the SCO UNIX Driver
To install:
1. Insert the “PC87410 PCI IDE Device Drivers”
diskette into a floppy drive.
IDE Device Drivers
u
4-8
