PCI/ISA System Board
The following explains the INSTALL.BAT and
DEVICE.LOG files.
INSTALL.BAT
This is used to configure working hard drives for future
installation under DOS, Windows NT and OS/2. The
HDD’s parameter information includes: R/W Multiple,
Track Remapping, Mode 3, LBA, and Drive Speed.
After confirming “Yes”, the DOS drive will be installed
and the configuration information for OS/2 and Win-
dows NT will also be updated to the following files.
DOS:
A:\DOSDRV\NSIDE..EXE
Windows NT:
A:\NTDRV\ATDIS.SYS
OS/2:
A:\OS2DRV\NSIDEOS2..ADD
DEVICE..LOG
The DEVICE.LOG file is contained in the DOSDRV
directory of the “PC87410 PCI IDE Device Drivers”
diskette. By running INSTALL.BAT, you can use the
DEVICE.LOG file to log drive speed information.
INSTALL.EXE, under the DOSDRV directory, will
update a new drive speed information to the
DEVICE.LOG file. If it doesn’t exist, copy the
DEVICE.LOG file to Drive C for future use. For drives
that don’t have speed information available in the
DEVICE.LOG file, you must run “Test” under the
“Drive_Speed” option of the Installation Utility. Execute
INSTALL.BAT to run the Installation Utility.
Installing the DOS Driver
1. Insert the “PC87410 PCI IDE Device Drivers”
diskette into drive A.
2. Type INSTALL.BAT.
4-5
u
IDE Device Drivers
