PCI/ISA System Board
2-9
u
Installation Overview
Jumper J13
CMOS Clean Select
If, for some reason, the CMOS becomes corrupted, the
system can be reconfigured with the default values
stored in the ROM chips. To load the default values, set
J13 pins 1 and 2 to On for approximately one to two
days, then return to the default position.
3
1
2
2
3
1
1-2 On: CMOS Clean
2-3 On: Normal
(Default)
Jumper J21
Display Type Select
Jumper J21 sets the display adapter to color or mono.
This jumper must match the type of display adapter
installed. If you change your video adapter, make sure
this jumper is changed accordingly.
1
3
2
2
1
3
1-2 On: Mono
2-3 On: Color
(Default)
