17
www.df-models.com
Load data program
This program is to load the data stored at the “save data” program. Press “Start/Enter” key to make the data
fi eld blink and press ”INC”or”DEC” for more than 3 seconds to load the data.
Choose the data number you want to call back. The data you want to call back will
be displayed.
Loading the data.
VARIOUS INFORMATION IN THE PROGRAM
You can inquire various information on the LCD screen during the charging and discharging proc-
ess. Press ”DEC”key, the charger will display users’ setting. You can press ”INC” key to monitor
voltage of each cell while the battery is connected with each port of the charger.
End Voltage
12.06V(3s)
The
fi nal voltage when the program ended.
Capacity Cut-Off
ON 5000mAh
Safety Timer
ON 200min
USB/Temp Select
USB Enabled
3-pin connector is selected to be the USB port.
Ext.Temp 26C
The external temperature is displayed when the temperature probe is used.
IN Power Voltage
12.56V
Present input voltage.
4.14 4.16 4.09
0.00 0.00 0.00
The battery is connected with each port through cable; you can
check voltage of each cell in the battery pack. When the cable is
connected with the ports on the right of the charger, the program
will display voltage of up to 6 batteries. The battery pack needs an
balancer connector connected with each cell.
PROGRAM SELECT
LOAD DATA
LOAD [01] NiMH
14.4V 3000mAh
Load ...
Start
Enter
Start
Enter > 3 sec
