14
www.df-models.com
current. Press “Start/Enter” key again to store the parameter value you set. Press “Batt type/
Stop” key to end the program.
Pb-6
4.0A 12.59V
CHG
022:43 00682
Battery type
Charge current
Battery voltage
Elapsed time
Charged capacity
Discharging of the Pb battery
Set up the charge current on the left and nominal voltage on the right. Range of discharge current
is 0.1-5.0A, the voltage should match the battery being charged. Press “Start/Enter” key for more
than 3 seconds to start charging.
Pb
DISCHARGE
1.0A
12.0V(6P)
The screen displays the real-time discharging status. Press “Start/Enter” key to alter discharge
current. Press “Start/Enter” key again to store the parameter value you set. Press “Batt type/
Stop” key to end the program.
Pb-6
0.4A 12.59V
DSC
022:43 00682
Battery type
Discharge current
Battery voltage
Elapsed time
Discharged capacity
NICD/NIMH BATTERY PROGRAM
Charging of NiCd/NiMH battery
• This program is for charging and discharging of NiCd/NiMH batteries associated with R/C
models applications.
You can press “Start/Enter” key to make it blink and then ”INC” or ”DEC” to change the param-
eter value. Press “Start/Enter” key to store the value.
NIMH CHARGE Aut
CUR LIMIT 5.0A
This program charges the battery using the current you set up. In the “auto” state, you should
set up the upper limit of the charge current to avoid damage by excessive feeding current. Some
batteries of low resistance and capacity can lead to higher current in the “auto” charging mode.
