DEZEGA TRAINER, User Manual

Page: 9 / 76

DEZEGA
SKTB.02.ТСТ1.00.00.000 РЭ-U2
9
The training self-rescuer consists of the following main parts (Fig. 2): case 2 with insert 3,
lid 17, imitating cartridge 1, air system (which includes breathing bag 10, breathing tube 13 with
a quick-release flange for replacement of the HME-imitator 14 and mouthpiece 6) and goggles 8.
Breathing bag 10 and breathing tube 13 are attached to the nozzles of the cartridge.
In the initial state, the air system is arranged under lid 17 (Fig. 1), which is pressed against case 2
by means of two coupling straps 18 and 19. They are hooked by brackets located on case 2
and form a quickopening lock on lid 17, which is protected by the installed cover plate 20. The training
self-rescuer is designed for shoulder carrying using and is completed with belt 21 for this purpose.
Fig. 3. General view of the disposable 15-/35- and 60-minute kits
for practicing of breathing conditions
1 – regenerative cartridge; 2 – starter; 3 – breathing tube; 4 – HME; 5 – plug;
6 – breathing bag; 7 – relief valve; 8 – nose clip; 9 – ring.
When installing the regenerative cartridge 1 (Fig. 3) with reusable air system or a disposable kit for
practicing of breathing conditions into the case, HME 4 is used. Quick-release flanges are installed at
the points of connection of the breathing tube with cartridge and HME (on the reusable air system).
The appearance, shape, overall dimensions, weight, carrying method and donning procedure of the
TRAINER training self-rescuer are similar to these of self-rescue rs 1PVM KS, ШСС-1П, SSS-1PV KS.