DEZEGA TRAINER, User Manual

Page: 12 / 76

SKTB.02.ТСТ1.00.00.000 РЭ-U2
DEZEGA
12
8. PREPARATION OF THE TRAINER TRAINING SELF-RESCUER
TO THE NEXT PRACTICE EXERCISE
8.1. Replacement of the HME-imitator and HME in the reusable air system:
• move the rubber ring on the quickrelease flange
along the tube towards the cartridge;
• disconnect HME from the breathing tube by
pulling the quick-release flange with one hand
and HME – with the other hand;
• connect the new HME to the breathing tube by
stretching the quick-release flange and inserting
the new HME into it;
• lock the new HME by moving the rubber ring
along the tube towards HME against the stop.
8.2. Laying the air system and installing the lid when using an imitative
cartridge:
8.2.1
remove the used HMEimitator from the
breathing tube and install a disinfected
(section 10.1) or a new one from the kit of
replacement parts;
8.2.2
remove the used mouthpiece plug from the
retainer and install a new one from
the HME-imitator;
8.2.3
place the cover of the imitating starter,
attached to the lid of the training self-rescuer,
on the magnet of the imitating starter, while
the thread, fixed to the cover, should be
located above the breathing tube when the
plug is placed to the right of the device (the
device is set facing the user);