18
EN
4) POWER TOOL USE AND CARE
a)
Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation.
If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the
power tool for operations different from those intended could result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Safety Warnings Common for Polishing Operations:
a)
This power tool is intended to function as a polisher. Read all safety warnings,
instructions, illustrations and specifications provided with this power tool.
Failure to
follow all instructions listed below may result in electric shock, fire and/or serious injury.
b)
Operations such as grinding, sanding, wire brushing or cutting-off are not
recommended to be performed with this power tool.
Operations for wool was not
designed may create a hazard and cause personal injury.
1. SAFETY INSTRUCTIONS
Summary of Contents for A7188-DP-1
Page 1: ...2018 01 POLISHER A7188 DP 1 EAN CODE 3276000254621 BR EN Instru esdeseguran ae jur dicas...
Page 2: ......
Page 16: ...BR 14...
Page 29: ...EN 27...
