Dexter Laundry 200SHS2.5, Instruction Manual

Page: 175 / 188

With the speed controller, the rate of oscillation can be selected (also during operation).
Rotate the speed controller to choose the suitable speed.
The optimum speed depends on the material and should be determined by carrying out a
practical test.
Stage 1: slow Stage 6: quick
Selecting the speed
5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
6. OPERATION
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
175
NOTE:
Hook and loop sanding base is not a warranty item.
We recommend the use of the dust extraction facility at all times.
To install the dust extraction tube, aimed at the grooves on the dust extraction port and
then insert the tube into the port.
Rotate the tube clockwise for locking.
A dust extraction system or a suitable vacuum cleaner is allowed to be connected to the
tube for enhancing the dust efficiency
Dust extraction bag is also provided.
To install the dust extraction bag, aimed at the grooves on the dust extraction port and then
insert the bag into the port.
Rotate the dust extraction bag clockwise for locking.
For efficient operation, always empty the dust extraction bag
Always keep the dust extraction holes in the sanding base free of obstructions.
Dust extraction
WARNING: Do not use the dust bag when sanding metal. The hot
metal particles could cause residual wood dust or the box itself to
catch fire.
WARNING: Clean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical hazards.