DIMAX404 User’s Manual
16
DEXON Systems
4.3
Auto Adjust
This message starts the auto adjust procedure. This command contains one part.
Command
:
AUTOADJUST
– auto adjust for RGB input
4.4
ADC Calibration for All Analog Inputs
This message starts the ADC calibration procedure. This command contains only one part.
Command
:
ADCCALIBRATION
– ADC calibration for all analog inputs using internal reference input.
4.5
Select Audio Input
This message changes the source of the audio input. This command contains two parts. First
part is the command selection; last part is the audio input id.
Command
:
AUDIOINPUT
– change source of audio input
Audio input id
must between 0 - 1.
0 – Embedded; 1 – External analog (Default: 0)
Sample:
AUDIOINPUT
1
– change the source of the audio to external analog (jack connector)
4.6
Change HDMI EQ
This message changes the value of the HDMI input EQ. This command contains two parts. First
part is the command selection; last part is the EQ level.
Command
:
HDMIEQ
– change HDMI EQ level
EQ Level
must between 0 - 1.
0 – EQ Low; 1 –EQ High (Default: 1)
