DIMAX404 User’s Manual
12
DEXON Systems
Figure 3-2. DXWebControl of DIMAX404 application overview
1. Input Status
This section shows the status of the input channels. Here you can see the detected
input signal timing (signal resolution and refresh rate) and the state of the HDCP
encryption.
2. Layouts
By clicking on the selected button a previously saved layout can be recalled.
3. User Presets
These buttons help the user to recall Presets easily.
4. Input Options
This panel visualizes a matrix for intuitive assignment between inputs and outputs. The
inputs are listed vertically the outputs are horizontally. Click on the desired rectangles to
assign the inputs with the outputs. Set audio and PIP assignment similarly.
The Close All button deletes every assignment.
Tick Auto Start and each action the user performs will take effect immediately
(otherwise pushing of Start button is required).
5. Output parameters for all of the displays
The output parameters can be modified in this section. These parameters are
Recommended Mode, Output Timing, Output Mode, HDCP and the Background Colour.
Here you can modify the PIP setting such as size and position of the PIP overlay, and
the Cropping of the outputs (Set the dimension and click on Full for Video wall mode).
6. Output status and settings for individual displays
In this section the output parameters of each display can be set individually:
Recommended Mode, Output Timing, Output Mode, HDCP, Background Colour and
EDID Expert.
7. Input Assignment View
2
3
1
6
5
4
7
8