NDS3107C Multiplexer User Manual
2.2.5 Packet Mode 2.2.6 Out Bit rate
2.2.7 Original Net ID 2.2.8 Transport Stream ID
3.3.3 IP output
NDS3107C supports 2 MPTS output through Data1 and Data2, the setting principle is the same
for Data1 and Data2, so here this manual just takes Data1 setting as the example to explain. After
pressing the enter key, the LCD will display the following pages:
3.1 DATA1 3.2 DATA2
3.1.1 Output Protocol 3.1.2 MPTS1
3.1.3 MPTS2
3.1.1.1 Output Mode 3.1.1.2 Filter Null PKT
3.1.1.3 Reset IP Address 3.1.1.4 Destination Port
3.3.4 Network Setting
After enter Network Setting, users can set the parameters of NMS interface and DATA interface
parameters, the setting principle is the same for NMS interface and DATA interface, so here this
manual just takes one as the example to explain, and the submenus shows as the following LCD
displays.
192.168.000.136
Submask
255.255.255.000
IP Addr
Default Gateway
000. 000.000.001
MAC Address
02:A1:A2:A3:A4:A5
3.3.5 Config Setting
11
