NDS3107C Multiplexer User Manual
►
1. Status 2. TS config
3. IP output 4. Network Setting
►
5. Config setting 6. Version
7. Language
The option with “
►
” is the current selection, users can press the ENTER key to enter the
specified submenu to modify the parameters.
3.3.1
Run Status
Alarm status
The alarm indicator will turn on if there is no A/V signals inputting or outputting bit rate
overflows. User then can enter this menu to check the error type. Otherwise it shows the ‘No
warning’.
Alarm status
No warning
Up time
Press Enter to enter “Up time” and it displays the working time duration of the device. It times
upon power on.
Uptime
00:37:54 up
3.3.2 TS Config
NDS3107C is equipped with 2 groups of ASI output, each groups have 2 channels. Under this
menu, users can enter the corresponding channels to set the relevant ASI output parameters. The
setting principle is the same for out 1 and 2, so here this manual just takes one channel as the
example to explain. After pressing the enter key, the LCD will display the following pages:
2.2.3 SDT Interval 2.2.4 SDT Insert
2.2.1 PAT Interval 2.2.2 PMT Intervel
10
