background image

 

The Multimedia Buttons on the keyboard are labeled as follows:  

 

 

Troubleshooting 

1) I cannot put my computer to sleep using the Suspend Hot Key- If you press 
the Suspend Hot Key to place your computer into suspend, standby, or 
hibernation mode. And nothing happens, then you may not have a computer 
with power management functionality. 
 

To fix this problem 

Refer to your computer hardware documentation regarding power-management 
operation. Ensure that the power-management settings for your operating system 
are correct, as described in Windows Help.

 

 

2) I cannot wake up my computer by pressing a key- If you pressed the Suspend 
Hot Key to place your computer into a suspension, standby, or hibernation mode, 
but cannot then awaken your computer by pressing another key, you may have 
encountered a problem with the power management functionality. Some systems 
will not wake up, once they have been placed into a suspend, standby, or 
hibernation mode. 
 

To fix this problem 

Do not press the Suspend Hot Key to wake up your computer.  The Suspend Hot 
Key is designed to only place your computer into a suspend, standby, or 
hibernation mode. Refer to your computer hardware documentation regarding 
power-management operation. Some computers may require you to press a 
particular button on the computer to wake it up. Ensure that the power-
management settings for your operating system are correct, as described in 
Windows Help.

 

 

3) My keyboard or mouse does not work or does not work properly after 
installation. 

 

To Fix This Problem 

Make sure you have connected the receiver correctly. For optimal performance, 
place the receiver at least 8 inches or 20 centimeters away from other electrical 
devices, such as the computer, the computer monitor, or external storages 
devices. Make sure you have installed the batteries correctly. Make sure you 
have set the same ID on both transmitter (mouse and keyboard) and the receiver 
(see Setting the ID under Hardware Installation). If the problem persists, try an 
alternative ID selection to avoid possible interference. Remember to set the 
same ID or both transmitter and receiver.

 

 
4) My keyboard or mouse is not detected 
 

To Fix This Problem: 

Make sure you have connected the receiver correctly. Do not plug or unplug the 
receiver cables while the computer is running. You may have other system 
devices that conflict with the mouse and keyboard. Check the IRQ / address 
settings of these devices for conflicts and change the settings as required.

 

 

Interference with other radio devices

  

Please try to keep the keyboard and the receiver away from other radio devices 
at least 8 inches (20cm) to avoid any interference.  
 

Interference with other RF wireless keyboard

  

Please switch the channel to a different ID. To do so, you need to adjust both 
receiver and keyboard to the new channel ID. To adjust the channel ID of the 
receiver, turn to the bottom of the receiver and select a different channel ID 
from other RF wireless keyboards. To adjust the channel ID of the keyboard, 
turn the keyboard upside down and remove the battery cover and the batteries. 
You will see the ID switcher. Select the channel ID to the 

exact

 same ID of the 

receiver. If you are using the keyboard within 30 feet of the receiver try to 
change the location of the receiver. You can use the magnetic pad on the bottom 
of the receiver to stick at up/left/right side of the computer case. 
 

Keyboard or pointing device is not function

ing: 

If keyboard or/and pointing device is/are not functional, please exit form any 
open programs and turn off the computer as you normally would when exiting 
Windows.                                                                               

??

 Check that both the keyboard cable and mouse cable is properly and firmly 

connected to the proper port. Additionally, check that the channel IDs (DIP 
Switches) of both receiver and keyboard are the same.  

??

Make sure that the batteries are properly installed and well connected. When 

testing use new batteries.  
Restart the computer again. If the keyboard or pointing device is still not 
functional, please contact technical support 

 


 

Vol + 
Vol - 

Increase volume. 
Decrease the volume. 

 2 

Play/Pause  Press this button once too play CD/VCD, press again to 

pause playing 

 3 

Mute 

Press this button once to mute the volume, press again 
to un-mute. 

 4  

Home  

Press this button to launch the default Internet brows er 
application. 

 5 

E-mail 

Press this button to launch the default E-mail 
application. 

 6 

Favorites 

Press this button to bring up “ My Favorites Window”, 
Press again to close “ My Favorites Window” . 

 7 

Search 

Press this button to bring up “Search window”  for web 
address, Press again to close “Search window” . 

Summary of Contents for KW2033









Reviews: