10
Panel Description
3
1
Turns the power on or off (p. 18).
With the factory settings VIVO H1’s power will
automatically be switched off 120 minutes after you stop
playing or operating the VIVO H1.
If VIVO H1’s power has been turned off automatically, you
can use the [POWER] switch to turn the VIVO H1 back on. If
you don’t want the power to turn off automatically, set the
“AUTO OFF” parameter to “OFF” (p. 51).
NOTE
To avoid malfunctions, never disconnect the AC/DC adaptor while
the instrument is turned on.
2
VOLUME
Use this knob to set VIVO H1’s overall volume.
3
USB Computer Port
Use a USB cable to connect the VIVO H1 to your computer
via this connector (p. 18).
4
USB Memory Port
Connect an commercially available USB Memory here.
NOTE
* Carefully insert the USB Memory making sure that the connector
on the device is appropriate and that it is connected in the proper
direction.
* Dexibell does not recommend using USB hubs, irrespective of
whether they are active or passive. Please connect only one USB
Memory to this port
5
Damper Pedal
Use this pedal to sustain the sound (p. 46).
6
Sostenuto Pedal
The notes you are pressing when this pedal is depressed will
be sustained, allowing future notes played to be unaffected
(p. 46).
7
Soft Pedal
This pedal is used to reduce the volume and slightly changes
the timbre (p. 47).
8
AUDIO IN
This mini jack allow you to connect the audio outputs of an
external signal source (CD/mp3 player, etc.).
9
PHONES output
This is where you can connect one or two pairs of optional
headphones.
Doing so switches off the internal speakers.
12
13
14
15
16
17
18
19
20
21
22
23
24
8
9
10
11
