manualshive.com logo in svg

Dexcom G4 Platinum Professional, User Manual

Share
Download
Dexcom G4 Platinum Professional User Manual Download Page 245

244 

|

  Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System

18

Receiver Alerts, Alarm and Prompts 

(continued from page 

before)

What will I see 

on the receiver 

screen?

Prompt, 

alert or 

alarm?

What does this 

mean?

How will the 

receiver notify 

me?

(vibrate and/or 

beep)

Will the 

receiver

re-notify 

me?

In both real-time 

and blinded modes:

Calibration 

prompt

The receiver 

needs a blood 

glucose value 

entered to 

calibrate. Sensor 

glucose readings 

will not be 

displayed at this 

time.

Vibrates 1 

time then        

vibrates/beeps 

every 5 minutes 

until confirmed.

Yes, 

every 15 

minutes.

In both real-time 

and blinded modes:

Startup 

calibration 

prompt

The receiver 

needs 2 blood 

glucose values 

entered to 

calibrate.

Vibrates 1 

time and then 

vibrates/beeps 

every 5 minutes 

until confirmed.

Yes, 

every 15 

minutes.

In both real-time 

and blinded modes:

Additional 

startup 

calibration 

prompt

The receiver 

needs 1 

additional blood 

glucose value to 

complete startup 

calibration.

Vibrates 1 

time and then 

vibrates/beeps 

every 5 minutes 

until confirmed.

Yes, 

every 15 

minutes.

(continued on next page)

Summary of Contents for G4 Platinum Professional




































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands