manualshive.com logo in svg

Dexcom G4 Platinum Professional, User Manual

Share
Download
Dexcom G4 Platinum Professional User Manual Download Page 136

Dexcom G4 PLATINUM Professional System User’s Guide 

|

 135

see the Dexcom website (www.dexcom.com) or the Dexcom STUDIO 

Software User’s Guide.
Once the Dexcom STUDIO software has been installed successfully, 

follow the following instructions to activate the blinded mode/clinical 

feature:
1.  Click “Tools” on the tool bar 

and select “Activate Clinical 

Features” from the drop down 

menu. 

2.  Dexcom STUDIO software prompts you to contact Dexcom Technical 

Support and provide them with the Activation Request Key that 

appears in the Activate Clinical Features pop-up window. Contact 

Dexcom Technical Support at 

1.877.339.2664

 or via e-mail at 

[email protected] and provide them your name, your 

practice name and the Activation Request Key Code. Once you 

receive an Activation Code from Dexcom Technical Support, enter 

it in the Activate Clinical Features window. Then click “OK.” Clinical 

features activation is a one-time process, and you will not need to 

repeat it.

Activate Clinical Features highlighted

Activate Clinical Features window

Summary of Contents for G4 Platinum Professional




































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands