manualshive.com logo in svg

Dexcom G4 Platinum Professional, User Manual

Share
Download
Dexcom G4 Platinum Professional User Manual Download Page 244

Dexcom G4 PLATINUM Professional System User’s Guide 

|

 243

Receiver Alerts, Alarm and Prompts 

(continued from page 

before)

What will I see 

on the receiver 

screen?

Prompt, 

alert or 

alarm?

What does this 

mean?

How will the 

receiver notify 

me?

(vibrate and/or 

beep)

Will the 

receiver

re-notify 

me?

In both real-time 

and blinded modes:

Wait 1 

hour 

calibration 

error alert

The sensor 

cannot calibrate. 

Wait a minimum 

of 1 hour then 

enter 1 more 

blood glucose 

value for 

calibration. If no 

sensor glucose 

readings appear 

on the receiver, 

the sensor needs 

to be replaced.

Vibrates 1 

time and then 

vibrates/beeps 

every 5 minutes 

until confirmed.

No

In both real-time 

and blinded modes:

12 hour 

calibration 

prompt

The receiver 

needs a blood 

glucose value 

entered to 

calibrate. 

Prompt screen 

only.

Yes, 

every 15 

minutes.

(continued on next page)

Summary of Contents for G4 Platinum Professional




































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands