DS-CAM-600
2Technical data
2.2.2 SIRIUS connection example
In this picture you see a typical SIRIUS device consisting of a S-Box unit (integrated PC) on bottom and one SIRIUS
slice on top (from rear side).
The camera is powered via PoE (Power over Ethernet, via LAN connector), therefore a Power injector is required
(Gigabit-LAN port of computer → PoE injector → camera).
The second cable provides the trigger, connected to the SYNC port of the SIRIUS slice. The camera frames are now in
perfect sync with the analog data acquired by DEWESoft
TM
.
Note: Even if the camera is connected, synching to other SIRIUS devices is still possible, because there are different
pins used on the Synch-Connector for triggering/synching (see also IO connector pinout).
Illustration 4: SIRIUS S-Box with one SIRIUS on top, connected to the DS-CAM-600 (PoE injector in between)
Page 5/17
www.dewesoft.com
Document-Version: 1.0.0
LAN in
Trigger cable
PoE Power
injector
LAN+Power
out
DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation
