DS-CAM-600
4FAQ
Change IP address of the camera
Illustration 17: Change IP address of the camera
If you manually change the IP address, please use the same subnet as the computer, example:
PC: 192.168.1.100, Subnet 255.255.255.0
Camera: 192.168.1.101, Subnet 255.255.255.0
The IP is ok, if the cameras are found with a red mark (see Illustration above), close GigEVisionClient and start
DEWESoft.
GigEVision client does not start, error message when starting
You can get it working by doing the following: Check if the operating system of your computer is 32bit or 64bit.
Copy the 64-bit dll’s (otherwise take the onces from the 32bit directories) from
C:\Program Files\Smartek\GigEVisionSDK\bin\Win64
and
C:\Program Files\Smartek\GigEVisionSDK\GenICam\bin\Win64_x64
to
\Windows\system32 (respectively \Windows\SysWOW64)
Then start the GigEVisionClient from C:\Program Files\Smartek\GigEVisionSDK\bin\Win64
Cameras not working in DEWESoft
If you followed the step-by-step installation procedure, but still the camera is not working in DEWESoft, you can try to
copy the used dll's manually:
Copy the 32-bit dll’s from
C:\Program Files\Smartek\GigEVisionSDK\bin\Win32
and
C:\Program Files\Smartek\GigEVisionSDK\GenICam\bin\Win32_i86
to
DEWESoft’s Addons folder.
Then restart DEWESoft.
Page 15/17
www.dewesoft.com
Document-Version: 1.0.0
DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation
