DS-CAM 600
TECHNICAL REFERENCE MANUAL
The camera is powered via PoE (Power over Ethernet, via LAN connector), therefore a Power injector is
required (Gigabit-LAN port of computer → PoE injector → camera).
The second cable provides the trigger, connected to the SYNC port of the SIRIUS slice. The camera
frames are now in perfect sync with the analog data acquired by DEWESoftTM.
Note: Even if the camera is connected, synching to other SIRIUS devices is still possible, because there
are different pins used on the Sync-Connector for triggering/synching (see also IO connector pinout).
Illustration 4: SIRIUS S-Box with one SIRIUS on top, connected to the DS-CAM-600 (PoE injector in between)
4.2.3. Connecting to existing DEWETRON systems
The DS-CAM-600 is also compatible with existing DEWETRON systems.
Please consider the system requirements:
●
See chapter System requirements
●
DEWETRON instruments must not have DI-ISO option (isolated inputs/outputs)! In this case
clocking is not possible, only free-run (the CLK pin is not available on the connector).
Free-run operation (without clocking) is easy, just connect the camera over PoE injector to the GigE LAN
port.
DS-CAM 600 V20-1
8/27
