DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
Illustration 19: IP address problem
See also Illustration 11 for a working example.
If the cameras are found, close GigEVisionClient and start DEWESoft.
Change IP address of the camera
If you manually change the IP address, please close DEWESoft, start the GigEVisionClient, right-click on
the camera and select “Set IP to device”; use the same subnet as the computer, example:
PC: 192.168.1.100, Subnet 255.255.255.0
Camera: 192.168.1.101, Subnet 255.255.255.0
The IP is ok, if the cameras are found with a red mark (see Illustration above), close GigEVisionClient and
start DEWESoft.
GigEVision client does not start, error message when starting
You can get it working by doing the following: Check if the operating system of your computer is 32bit
or 64bit.
Copy the 64-bit dlls (otherwise take the ones from the 32bit directories) from
C:\Program Files\Smartek\GigEVisionSDK\bin\Win64 and
C:\Program Files\Smartek\GigEVisionSDK\GenICam\bin\Win64_x64 to
\Windows\system32 (respectively \Windows\SysWOW64)
Then start the GigEVisionClient from C:\Program Files\Smartek\GigEVisionSDK\bin\Win64
Cameras not working in DEWESoft
If you followed the step-by-step installation procedure, but still the camera is not working in DEWESoft,
you can try to copy the used dlls manually:
Copy the 32-bit dlls from
DS-CAM-88c / DS-CAM-120c V20-1
22/31