SIRIUSi-XHS®
TECHNICAL REFERENCE MANUAL
CAN connector: pin-out (DSUB-9 male)
Pin
Name
Description
1
RES
Reserved
2
CAN_LOW
CAN low
3
DGND
Digital Ground
4
RES
Reserved
5
+5 V
5 V, 100 mA supply
6
RES
Reserved
7
CAN_HIGH
CAN high
8
RES
Reserved
9
RES
Reserved
3.5.4. GND connector
For correct measurements, it is highly recommended to ground the SIRIUS®. The GND connector is
usually a banana connector. There may also be a screw connector: e.g. SIRIUS-R8.
Warning
It is mandatory to connect a ground cable to the GND connector when you are working with high
voltages: e.g. when you are working with the HV modules.
Important
CAN transmit is currently not supported, therefore all the plugins that require CAN transmit do
not work property (e.g. OBD2, XCP)
SIRIUSi-XHS® - V21-2
31/52
